lavendertsui94@gmail.com
The no.4 machine:
This machine is made of the laminating steel ( JIS standard ), the speed of the whole line is could be adjust by the control panel, and the fastest speed is 60 M/ min, but now you can see the speed from the control panel.
The main working part is the grinding head—roller, this part will rotate during the sheet entering into the central,
The both side of the roller is conveying rolls, its covered with the rubber, and control the direction of the feeding.
The top and the bottom side is grinding roll and the bottom roll,
The grinding bearing could be lifted and down by the control panel, but the flower roller covered by the rubber, the range of lifting and downing separated the micro adjusting and substantial.
The surface of the roll is rubber and JIS standard stainless steel. The basic sheet selection is to be of 2B or BA sheet and should be preferably polished with 150#, 180# abrasive belt. The application verticals of this finish to name a few are in cookware, furniture, elevator, architectural decoration, revolving door, exterior decoration etc.
The hairline machine
The hairline machine is the usual machine for the production line, and the roller of the machine is including the flower roll, bottom roll and the transmit rolls.
Basing on the sanding pattern, the follower roll with the NRD rubber covers the surface, with the gap on surface, the seam distance and the seam depth is very important of the gap.
In the central part of the main machine, the electric eye of the hairline machine could have control the swing range; make the belt to cover the sheet, so that the sheet will not seal the sheet without the processing. The main bearing for the machine will swing from front to back.
The transmit rolls for the hairline machine control the stable transmission position for the stainless steel plate, make the range entry to the suitable central position to be processed by the belt and the flower roller.
The basic plate selection should be hairline polishing surface stainless steel sheet, it should be subjected to polish with 150# 240#abrasive belt. The application verticals of this finish in elevator, architecture decoration, revolving door, furniture, home appliance, auto sector, exterior decoration, etc.
